Table of Contents
Advertisement
Loading the paper with optional Automatic Sheet
Feeder
If you are not using the optional Automatic Sheet Feeder, refer to the
previous section.
1. Install the optional Automatic Sheet Feeder as described in Chapter 3.
-
F/gun 4-14. Install the optional Automatic Sheet Feeder.
2. Use the printer's Memory Switchmode to select ASF. (For details, please
refer to Chapter 6.)
-
3. If fanfold paper has already been loaded in the printer, park the paper
-
through the rear slot.
-
4. Pull the printer release lever forward to load single sheets.
5. When you areusingSingle-BinASF,pullthepaperloadingleverforward
to pull the hopper out until it is in position.
In case of the Dual-Bin ASF, pull both pressure bar levers forward to
open the pressure bar.
38
.-
Advertisement
Table of Contents
