Font Control Commands - Star Multi-Font XR-1020 User Manual

FONT CONTROL COMMANDS
Select draft quality characters
Mode ASCII
Decimal Hexadecimal
Std. &SC> 4'xv "0"
27120 48 1B 70 30
<ESC> "X"
co7
27120 0 1B 78 00
Changes from near letter quality to draft quality. Ignored if the FONT
LOCK mode was selected during power-up.
Select draft pica characters
Mode ASCII
Decimal Hexadecimal
--
IBM <ESC> "I" <O>
27
73 0
1B 49 00
Changes to draft quality characters with pica pitch (10 cpi). Ignored
if the FONT LOCK or PITCH LOCK mode was selected during power-
up.
Select draft elite characters
IMode 1 ASCII 1 Decimal
1 Hexadecimal 1
1 IBM 1 cESC7 "I"
cl7 127
73 1 IlB401 1
Changes to draft quality characters with elite pitch (12 cpi). Ignored
if the FONT LOCK or PITCH LOCK mode was selected during power-
up.
Select NL Q characters
Mode 1 ASCII Decimal Hexadecimal -
<Esc>
"XI' " "
std.
1
27120 49 1B 70 31
.
cESC7 "X"
cl7
27 120 1 IB 78 01
IBM cEsc> "I" 6
27 73 2 1B 43 02
cEsc7 "I"
-57
27 73 3 1B 49 03
Changes from draft quality to near letter quality. The initial NLQ
font is Sanserif unless a different font has been selected by a
preceding command. Ignored if the FONT LOCK mode was selected
during power-up.
66