Rev 4 Apr. 13
Note: The appearance of the homepage varies depending on the type of network the
device is connected to. For more details and information on configuring the LS300, refer to
the ALEOS Configuration User Guide.
Figure 2-10: ACEmanager homepage
LED Operation
LED Colors
The four front panel LEDs show the status of various items and can be used as a
troubleshooting aid. They are multi-colored:
•
Off—No activity
•
Red—Not functional
•
Yellow—Limited functionality
•
Green—Fully functional
•
Blinking—Shows altered or reduced functionality
Note: When the LEDs are cycling yellow, the reset button has been pushed and the device
is reset to factory default settings.
Network LED
This monitors the cellular network.
•
Red—No cellular network is present or the device is in radio passthru mode.
(There is no network coverage at the location.)
•
Flashing red—The device is attempting to connect to the cellular network.
•
Yellow—The cellular network is found and the device is connecting.
•
Flashing yellow—The cellular network is unavailable. (The device was
unable to authenticate on the network.)
•
Green—Connected to the cellular network.
Installation and Startup
25