Led Behavior; Step 7-Use The Fx30S - Sierra Wireless FX30S User Manual

Table 2-5: LED Behavior
LED
Power
(Default Behavior)
Note: Based on three GPIOs. To define
the behavior of this LED, see
on page 60.
User
Note: Based on two GPIOs. To define the
behavior of this LED, see
page 60.
Note: You can write Legato applications to
define User LED behavior.
Rev 2 Mar.18

LED Behavior

Color / Pattern
Off
Solid Red
Solid Amber
Power LED
Possible colors:
Red
•
Green
•
Amber
•
User LED on
Step 7—Use the FX30S
You can use the FX30S as:
• A USB modem (Use AT commands to configure)
• An embedded cellular platform for IoT applications (Use AT commands, Linux
shell commands, or Legato to configure/program. See
User LED
No power or input voltage
Gateway is powered on, not attached to cellular
network.
Attached to cellular network.
User-defined behavior
31
Installation and Startup
Power LED
Description
≥ 32 VDC or ≤ 4.75 VDC
page 34.)
41110485