Product Version - Festo VTEM Description, Function, Parameterisation

About this document
1.3

Product version

This document refers to the following product versions:
Product
VTEM-...
CTMM-S1-C
Firmware
VEVM-S1-27-...
CTMM-S1-D-8E-M8-3
CTMM-S1-A-8E-A-M8-4
Browser
1)
1) Use current version.
Tab. 2 Product version
The product version can be identified from the product labelling or with the help of appropriate soft-
ware from Festo.
Appropriate software for determining the product version can be found in the Festo Support Portal
è www.festo.com/sp.
Information on using the software can be found in the integrated Help function.
NOTICE!
There may be an updated version of this document for these or later product versions.
• Check if there is an updated version of this document è www.festo.com/sp.
8
Version
Motion Terminal VTEM from revision 01
Controller of the Motion Terminal VTEM from revision 01
Firmware of the controller CTMM from version 4.12.0
Valve for Motion Terminal VTEM from revision 01
Digital input module for Motion Terminal VTEM from revision 02
Analogue input module for Motion Terminal VTEM from revision 02
– Firefox From version 38 (recommended)
– Chrome From version 64
– Internet Explorer From version 11
– Microsoft Edge From version 38
Festo — VTEM — 2019-03b