About This Document; Further Applicable Documents; Target Group; Product Version - Festo VTEM Description

1

About this document

1 About this document
This document describes the function and parameterisation of the Motion App named on the title page. Information
relevant for understanding the function as well as necessary steps and approaches for carrying out parameterisation
are described in other documents (è 1.1 Further applicable documents).
1.1

Further applicable documents

Document
Instructions for mounting Motion Terminal CPX, VTEM
(CPX_VTEM)
Instructions for use of VTEM Motion Terminal (VTEM)
Description of Motion Terminal VTEM,
function and parameterisation
(VTEM)
CPX system description
(P.BE-CPX-SYS-...)
Tab. 1.1
For all available product documentation è www.festo.com/pk
1.2

Target group

This document is intended for qualified personnel. Experience with electrical and pneumatic control systems is
required in order to understand this documentation.
1.3

Product version

This document refers to the following product versions:
Product
VTEM-...
CTMM-S1-C
Firmware
VEVM-S1-27-...
CTMM-S1-D-8E-M8-3
CTMM-S1-A-8E-A-M8-4
Browser
Tab. 1.2
The product version can be determined using the [System] [Information] page in the WebConfig user interface
of the Motion Terminal.
Note
There may be an updated version of this document for these or later product versions.
• Check whether a corresponding version of this document is available (è www.festo.com/sp).
4
Version
Motion Terminal VTEM from Revision 01
Controller of the Motion Terminal VTEM from Revision 01
Firmware of the CTMM controller from Version 4.0.2
Valve for Motion Terminal VTEM from Revision 01
Digital input module for Motion Terminal VTEM from Revision 01
Analogue input module for Motion Terminal VTEM from Revision 01
Firefox from Version 38
Contents
Instructions and important notes for mounting the
Motion Terminal VTEM with attached CPX terminal
Instructions and important notes on handling,
installation, commissioning and maintenance
of the Motion Terminal VTEM
Detailed description of the Motion Terminal VTEM
as well as its function and parameterisation
Information on the complete system of the CPX terminal
Festo – VTEM-MA05-EN – 2017-12 – English