Supported Peripherals; Supported Cpx Bus Nodes; List Of Supported Drives - Festo VTEM Description, Function, Parameterisation

Supported peripherals

5 Supported peripherals
5.1

Supported CPX bus nodes

The CPX terminal can establish the connection to a higher-order controller by means of one of the fol-
lowing bus nodes:
Type code Designation
CPX-FB11 Bus node
CPX-FB13 Bus node
CPX-FB14 Bus node
CPX-FB23-24 Bus node
CPX-FB33 Bus node
CPX-FB34 Bus node
CPX-FB36 Bus node
CPX-FB37 Bus node
CPX-FB38 Bus node
CPX-FB39 Bus node
CPX-FB40 Bus node
T32 CoDeSys embedded controller
T33 CoDeSys embedded controller
T34 CoDeSys embedded controller
1) No component available, individual configuration via CPX-FMT.
Tab. 124 Supported CPX bus nodes
5.2

List of supported drives

è www.festo.com/sp è VTEM è Expert knowledge
This list contains all Festo drives approved for the Motion Terminal and the corresponding value that
must be entered in the "drive type" system parameter (ID 20) in order to be able to operate the
respective drive with a Motion App.
102
Protocol
DeviceNet
PROFIBUS
CANopen
CC-LINK
PROFINET
PROFINET
EtherNet/IP, Modbus TCP
EtherCAT
EtherCAT
Sercos III
Ethernet POWERLINK
1)
RS232 (S1)
CANopen
SoftMotion
Festo — VTEM — 2019-03b