Using The Memory Function; Saving Embroidery Patterns; Retrieving Embroidery Patterns - Brother 882-W70 Operation Manual

USING THE MEMORY FUNCTION

USING THE MEMORY FUNCTION

Saving Embroidery Patterns

Note
• Do not turn the main power to OFF while the
[Saving...] screen is displayed. You will lose the
pattern you are saving.
• Embroidery patterns cannot be transferred if the
computer and machine are connected to different
home networks. Be sure to connect to the same
home network.
a
Press when the pattern you want to save is in
the embroidering screen.
b
Press the desired destination to start saving.
1 1
1 Save to the machine's memory.
2 Save to the USB media. The pattern is saved in a folder
labeled [bPocket].
When saving the embroidery pattern in a USB media,
insert the USB media into the USB port on the machine.
3 Save the pattern via the wireless network connection.
For detailed procedures, refer to PE-DESIGN manual
(Version 11 or higher).

Retrieving Embroidery Patterns

a
Press the desired destination, and then select the
desired embroidery pattern.
150
1 Retrieve from the machine's memory.
2 Retrieve from a USB media.
When retrieving the embroidery patterns from a USB
media, insert the USB media into the USB port on the
machine.
3 Retrieve the pattern via the wireless network connection.
For detailed procedures, refer to PE-DESIGN manual
(Version 11 or higher).
• If the embroidery pattern to be retrieved is in a
folder of the USB media, press the key for that
folder. Press
• You can save all or multiple data to the machine by
pressing
2
3
• To select multiple patterns, press their thumbnails.
•
•
•
* To cancel the selection, press
b
Press
* Press
Memo
to return to the previous screen.
.
: Select all patterns.
: Deselect all patterns.
: Save the selected patterns to the machine.
.
to delete the embroidery pattern.
1
3
2
again.