Table of Contents
Advertisement
■ Adjusting the Amount of Fabric Feeding from
the Dual Feed Foot
The dual feed mechanism pulls the top fabric according to
the set stitch length. With troublesome fabrics, fine tune
the set length, by changing the dual feed feed adjustment
in the settings screen.
Note
• As a default, some keys mentioned in the following
procedures appear in light gray and are not
available. To enable the keys for specifying the
settings, attach the dual feed foot to the machine.
The keys are enabled after the dual feed foot is
detected.
a
Press
.
The settings screen appears.
b
Press
.
The sewing settings screen appears.
c
Display [Dual Feed Feed Adjustment] in the sewing
settings screen.
d
Use
or
to increase or decrease the feeding of
the top fabric.
*
Select [00] for sewing in most cases.
*
If the feed amount for the top fabric is too little,
causing the fabric to be longer than the bottom
fabric, press
to increase the feed amount for the
top fabric.
*
If the feed amount for the top fabric is too much,
causing the fabric to be shorter than the bottom
fabric, press
to decrease the feed amount for the
top fabric.
e
Press
to return to the original screen.
CHANGING THE PRESSER FOOT
1
53
Advertisement
Table of Contents
