Table of Contents
Advertisement
SEWING
Note
• When cutting thread, such as metallic thread or
other decorative threads, use the thread cutter on
the side of the machine. Cut transparent nylon
thread in the same way.
k
When the needle has stopped moving, raise the presser
foot and remove the fabric.
■ Using the Foot Controller
You can also use the foot controller to start and stop
sewing.
Memo
• When the foot controller is connected, you cannot
use the "Start/Stop" button.
• The foot controller cannot be used when
embroidering.
a
Turn off the machine.
b
Insert the foot controller plug into the foot controller
jack on the machine.
a
c
Turn on the machine.
d
Slowly depress the foot controller to start sewing.
Memo
• The speed that is set using the sewing speed
controller will be the foot controller's maximum
sewing speed.
e
Release the foot controller to stop the machine.
58
1 Foot controller jack
Combining Stitch Patterns
Stitch patterns from the following categories can be
combined.
Example:
a
Press
.
b
Select the following stitch pattern (8-35).
c
Press
so that it displays
d
Press
.
The display returns to the stitch selection screen.
.
Advertisement
Table of Contents
