Brother 882-W70 Operation Manual page 123

f
Attach the embroidery frame to the machine, and then
press .
g
Press to set the starting point to the center top of
the pattern.
h
Press .
i
Press , and then press
j
Press
thread mark on the fabric is aligned with the light of
the LED pointer.
*
k
Press
l
Remove the thread mark.
m
Start embroidering.
.
to move the embroidery frame until the
To check the needle drop point with the light of the
LED pointer, press .
Memo
• For the accurate needle drop point, slowly turn the
handwheel toward you (counterclockwise) to lower
the needle. Then, turn the handwheel away from
you (clockwise) until the mark on the handwheel is
at the top. The carriage cannot move if the mark on
the handwheel is not at the top.
a
.
EDITING PATTERNS
1 Mark
4
121