Table of Contents
Advertisement
b
Insert the telescopic thread guide into the round hole
at the center of the spool support, and then use a
screwdriver to securely tighten the screw from the
reverse side.
1 Screw
Note
• Make sure that the stoppers on the telescopic
thread guide shaft are firmly in place and that the
thread guide openings are directly above the two
holes for spool pins in the spool support. In
addition, check that the shaft is securely tightened
in the spool support.
c
Firmly insert the two spool pins into the two holes in
the spool support.
d
Open the upper cover of the machine, and then pull
the upper cover up to remove it from the machine.
NAMES OF MACHINE PARTS
e
Insert the spool stand onto the notches of the machine.
■ How To Remove
a
Pull the spool stand up to remove it from the machine.
b
Attach the upper cover to the machine.
1
21
Advertisement
Table of Contents
