Table of Contents
Advertisement
■ Aligning the Embroidering Position
a
Calibrate the position of the background image.
(page 132)
b
Press
.
Memo
• The orientation of the pattern will change
depending on the orientation of the embroidery
positioning sticker.
c
When the following message appears, press
d
Select the position to be set as the reference point.
CONFIRMING THE PATTERN POSITION
e
Press
.
When the following message appears, press
f
Remove the embroidery positioning sticker, and then
start embroidering.
.
*
To remove the embroidery positioning sticker more
easily, press
moves slightly forward and away from under the
needle. After the embroidery positioning sticker is
removed, press
Checking the Pattern Position
The carriage moves and shows the pattern position.
Watch the embroidery frame closely to make sure the
pattern will be embroidered in the right place.
a
Press
.
so that the embroidery frame
.
.
4
133
Advertisement
Table of Contents
