Table of Contents
Advertisement
CHANGING THE PRESSER FOOT
c
Position the dual feed foot to the presser foot bar by
aligning the notch of the dual feed foot to the large
screw.
Side view
d
Hold the dual feed foot in place with your right hand,
then using the disc-shaped screwdriver securely tighten
the large screw.
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.
e
Plug the connector of the dual feed foot into the jack
on the back of your machine.
f
Press
to unlock all keys and buttons.
All keys and operation buttons are unlocked, and the
previous screen is displayed.
52
■ Attaching/Detaching Toe
Attach the toe by aligning the pins with the notches and
snap it into place.
a
If you push down on the front and back part of the dual
feed foot, the toe of the dual feed foot will snap off.
■ Using the Dual Feed Position Lever
When the feed position lever is up, the black roller belt on
the dual feed is not engaged.
When the feed position lever is down, the black roller belt
on the dual feed is engaged.
Note
• Do not operate the lever while sewing.
1 Pins
2 Notches
Advertisement
Table of Contents
