Download  Print this page

Utility Stitches; Straight Stitches - Brother 882-W70 Operation Manual

Embroidery and sewing machine.
Hide thumbs



• Before replacing the presser foot, be sure to
to lock all keys and buttons,
otherwise injuries may occur if the "Start/
Stop" button or any other button is pressed
and the machine starts. For details on changing
the presser foot, refer to "Replacing the Presser
Foot" on page 50.

Straight Stitches

• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 194.
1 Left needle position
2 Middle needle position
■ Changing the Needle Position (Left or Middle
Needle Position Stitches Only)
When you select left or middle needle position stitches,
you can use
change the position of the needle. Match the distance
from the right edge of the presser foot to the needle with
the stitch width, then align the edge of the presser foot
with the edge of the fabric during sewing for an attractive
in the L/R Shift display to
1 Stitch width
Example: Left/Middle needle position stitches
12.0 mm
8.5 mm
1/2 inch)
5/16 inch)
■ Aligning the Fabric with a Mark on the Needle
Plate or Bobbin Cover (with Mark)
While sewing, align the edge of the fabric with the 5/8
inch (approx. 1.6 cm) mark on the needle plate or bobbin
cover (with mark) depending on the needle position (left
or middle (center) needle position stitches only).
For stitches with a left needle position
(Stitch width: 0.0 mm)
1 Seam
2 Presser foot
3 Centimeters
4 Inches
5 Needle plate
6 5/8 inch (approx. 1.6 cm)
6.5 mm
5.0 mm
1/4 inch)
3/16 inch)


Table of Contents

   Related Manuals for Brother 882-W70

Comments to this Manuals

Symbols: 0
Latest comments: