Confirming The Pattern Position; Checking The Pattern Position; Previewing The Selected Pattern - Brother BP3500D Operation Manual

Confirming the Pattern Position

The pattern is normally positioned in the center of the
embroidery frame. If the pattern needs to be repositioned
for better placement on the garment, you can check the
layout before starting embroidery.

Checking the pattern position

The embroidery frame moves and shows the pattern position.
Watch the frame closely to make sure the pattern will be sewn
in the right place.
a Press on the embroidery settings screen.
b From , press the key for the position that you
want to check.
1 Selected position
→ The carriage will move to the selected position on
the pattern.
Memo
• To see the entire embroidering area, press
The embroidery frame moves and shows the
embroidery area.
CAUTION
• Make sure the needle is up when the
embroidery frame is moving. If the needle is
down, it could break and result in injury.
c Press

Previewing the selected pattern

a Press
→ An image of the pattern as it will be embroidered
appears.
b Press
preview.
• Frames displayed in light gray cannot be selected.
• Press
• The pattern can be sewn as it appears in the
following display.
1
■ Frame sizes displayed on screen
Display
Extra large embroidery frame
26 cm × 16 cm (10-1/4 inches × 6-1/4 inches)
.
Large embroidery frame (sold separately with some
models)
18 cm × 13 cm (7 inches × 5 inches)
Medium embroidery frame (sold separately with
some models)
10 cm × 10 cm (4 inches × 4 inches)
Small embroidery frame (sold separately with some
models)
2 cm × 6 cm (1 inch × 2-1/2 inches)
Press
c
Confirming the Pattern Position
.
.
to select the frame used in the
to enlarge the image of the pattern.
Frame type and embroidering area
to return to the original screen.
Basic operations B-63
B