Checking The Pattern Position - Brother 882-W83 Operation Manual

CONFIRMING THE PATTERN POSITION
e
Touch .
 When the following message appears, touch
f
Remove the embroidery positioning sticker, and then
start embroidering.
* To remove the embroidery positioning sticker more
easily, touch
moves slightly forward and away from under the
needle. After the embroidery positioning sticker is
removed, touch

Checking the Pattern Position

The carriage moves and shows the pattern position. Watch the
embroidery frame closely to make sure the pattern will be
embroidered in the right place.
a
Touch .
60
so that the embroidery frame
.
b
From , touch the key for the position that you
want to check.
.
1 Selected position
 The carriage will move to the selected position on
the pattern.
Memo
• To see the entire embroidering area, touch
The carriage moves and shows the embroidery
area.
CAUTION
• Do not lower the needle when the embroidery
frame is moving. If the needle is down, it could
break and result in injury.
c
Touch .
1
.