Intellian v100GX Installation And Operation Manual page 134

v100GX – Marine Satellite Communication System
134
E2S ( Ethernet-to-Serial) Upgrade
2
3
4
1 5
6
No. Item
E2S Upgrade
1
New E2S Firmware
2
E2S Service Pack
3
New E2S Service
4
Pack
Service Pack
5
Setting
Service Pack
6
Status
E2S firmware upgrade procedures:
1. Click on "Browse" button to select the E2S firmware file (.bin) that you
wish to upgrade.
2. Click on "Start Update" button to update the E2S firmware. Wait until
the page is loaded.
3. It'll inform you that the firmware is being uploaded.
Description
Upgrade the firmware of Ethernet-to-Serial module.
Select a new E2S firmware file and click Start Upgrade but-
ton to upgrade the firmware of Ethernet-to-Serial module.
Upgrade Adds-on by uploading Service Pack.
Select a new E2S Service Pack file and click Start Upgrade
button to upgrade the Service Pack.
Displays uploaded Service Pack information. Change the
STATUS from Unload to Load to apply the new Service Pack.
Displays currently loaded Service Pack status.
Graph Service Pack and SSL Service Pack cannot be loaded
at the same time.