Calibration Digits 0, 1, 2 (Calculated); Dr 5 Zeroing Memory - Siemens SIWAREX WP321 Operating Instructions Manual

Variable Note
Calibration digits 0
(calculated): Calibra‐
Calibration digits
tion digits calculated
0, 1, 2 (calculated)
in "Automatic Calibra‐
(Page 71)
tion"
Calibration digits 1
(calculated): Calibra‐
tion digits calculated
in "Automatic Calibra‐
tion"
Calibration digits 2
(calculated): Calibra‐
tion digits calculated
in "Automatic Calibra‐
tion"
Reserve 1 Reserve
Reserve 2 Reserve
Reserve 3 Reserve
8.6.1

Calibration digits 0, 1, 2 (calculated)

The calculation is based on the parameters from DR 3 and DR 10 identified by bold font and is
activated by the command no. 82.
8.7

DR 5 zeroing memory

Data record DR 5 displays the current values in the tare memory and the zeroing memory.
Procedure
● Check all parameters
● Transfer the data record to the scale
Table 8-3 Assignment of data record 5
Variable Note
Data record Contains no. of data re‐
number cord
Length Data record length infor‐
mation
Application Information about which
application the DR be‐
longs to
Version identifi‐ Information on the current
er data record version
SIWAREX WP321
Operating Instructions, 08/2019, A5E33715669A-AD
Type L
DINT 4
DINT 4
DINT 4
INT 2
UINT 2
REAL 4
Type L
UINT 2
UINT 2
UINT 2
UINT 2
Scale parameters and functions
8.7 DR 5 zeroing memory
Rw Default Min.
r ?
r 0
r 0
r 0 -
r 0 -
r 0 -
Rw Default
r 5
r 40
r 201
r 1
Max.
-
-
-
Min. Max.
- -
- -
- -
1 65635
71