Effective Tare Weight - From Specification; Effective Tare Weight (Semi-Automatic); Zero Weight (Semi-Automatic) - Siemens SIWAREX WP321 Operating Instructions Manual

Scale parameters and functions
8.7 DR 5 zeroing memory
Variable Note
Effective tare Current tare weight from
weight - from specification as process
specification value
(Page 72)
Effective tare Current tare weight from
weight (semi- semi-automatic mode as
automatic) process value
(Page 72)
Reserve Reserve
Zero weight Current zeroing weight
(semi-automat‐ (affected by zeroing)
ic) (Page 72)
Current zero Zero point correction
tracking weight weight affected by auto‐
(Page 73) matic zeroing
Dead load Dead load determined
(Page 73) during calibration
Reserve 1 Reserve
Reserve 2 Reserve
Reserve 3 Reserve
8.7.1

Effective tare weight - from specification

A tare weight can be specified in data record DR 15. You activate the specified tare weight with
a command (see command 1013). From this point on, the activated tare weight is factored into
the weight calculations. The "Delete tare" command deactivates the active tare weight. This
does not delete the specification in data record DR 15.
8.7.2

Effective tare weight (semi-automatic)

The corresponding command (see command 1011) applies the current gross weight as the
active tare weight. From this point on, the activated tare weight is factored into the weight
calculations. The "Delete tare" command deactivates the active tare weight.
8.7.3

Zero weight (semi-automatic)

The zero weight command (see command 1001) entered by the user sets the current gross
weight to "Zero" provided it is within the defined zero setting limits. The current gross weight is
saved as the zero weight. The zeroing weight must be within the specified range (usually +3 /
‑1 % of the set zero point).
72
Type L
REAL 4
REAL 4
REAL 4
REAL 4
REAL 4
REAL 4
INT 2
UINT 2
REAL 4
Rw Default Min.
rw 0 0
rw 0 0
rw 0 -
rw 0 Depends
on specifi‐
cation in
DR 3
rw 0 Depends
on specifi‐
cation in
DR 3
r 0 Depends
on specifi‐
cation in
DR 3
rw 0 -
rw 0 -
rw 0 -
Operating Instructions, 08/2019, A5E33715669A-AD
Max.
Depends
on specifi‐
cation in
DR 3
Depends
on specifi‐
cation in
DR 3
-
Depends
on specifi‐
cation in
DR 3
Depends
on specifi‐
cation in
DR 3
Depends
on specifi‐
cation in
DR 3
-
-
-
SIWAREX WP321