Burglary Verification; Call Waiting; Fire Alarm Verification; System Lockout Due To Invalid Attempts - Johnson Controls Tyco PowerSeries Pro User Manual

Chapter
10
To configure a Command Output to Follow a Schedule
1. Press [*][7] then use the scroll keys to navigate to Follow Schedule
and press [*], followed by your access code.
OR
press [*][7][9][User Code].
2. Press the command output #(1-4) to select a schedule and if
required enter your [access code].
OR
use the scroll keys to navigate to the desired command output and
press to toggle scheduling and if required enter your [access code].

10.6 Burglary Verification

The PowerSeries Pro system includes cross zone and sequential detection features that require an activ-
ation on two or more zones, within a given time period, to generate a confirmed alarm and immediate
police response.
NOTE: This feature must be enabled and configured by your installer.

10.7 Call Waiting

The PowerSeries Pro system includes a programmable option for call waiting to prevent a call waiting
line from interfering with the alarm verification process. This option is disabled by default.
NOTE: This feature must be enabled and configured by your installer.

10.8 Fire Alarm Verification

Fire Alarm Verification is an available option for Fire zones. If configured, and the conditions for alarm
verification are met, the fire alarm sounds and an alarm transmission is sent to the monitoring station.
NOTE: This feature must be enabled and configured by your installer.

10.9 System Lockout Due To Invalid Attempts

If too many invalid access codes are entered, your system can be configured to automatically lockout
input from all keypads, wireless keys and proximity tags for a programmed duration. If this happens, wait
the programmed duration then try again.
When the system is locked out the following message is displayed.
NOTE: This feature and lockout duration must be configured by your installer. Fire, Medical and Panic
keys are still active during a System Lockout.
- -
32
LCD Display
Output Control <>
Scroll to View
then
Press (*) to
Follow Schedule
Partition 1 <>
Command O/P 1 Y
LCD Display
Keypad Lockout