Additional Features; Display Temperature For All Zones; Turning The Chime On/Off; Audio Verification - Johnson Controls Tyco PowerSeries Pro User Manual

Chapter
10

10.0 Additional Features

10.1 Display Temperature For All Zones

This feature displays the temperature for each enabled zone.
To view zone temperature
1. Press [*] in the main menu on any partitioned keypad.
2. Press [*] to select temperature. For quick access press [*][*] (example
display shown).
3. Scroll through the menu to view the temperature capable zones.
4. Press [#] to exit.
NOTE: This feature must be enabled by your installer.

10.2 Turning the Chime ON/OFF

Turning the chime on audibly notifies you when an entry/exit sensor is activated.
To turn the Chime ON or OFF
Press the Chime key
l
or Off for the current partition. An access code may be required to
change this setting.

10.3 Audio Verification

Allows the monitoring station to initiate a 2-way audio (talk/listen) or 1-way audio (listen-in only) session
when an alarm has been received. This feature is used to verify the nature of the alarm or determine the
type of assistance required by the occupant.
NOTE: This is a supplementary feature that has not been investigated by UL/ULC.
NOTE: Must be enabled and configured by installer.

10.4 Visual Verification

Allows the monitoring station to use video clips captured from system motion cameras for verification of
any alarms.
NOTE: This is a supplementary feature that has not been investigated by UL/ULC.
NOTE: Must be enabled and configured by installer.

10.5 Command Outputs

While being useful for many applications, Command outputs are typically configured to operate items
such as garage doors or electric gates. Additionally, command outputs can be assigned to follow a sched-
ule configured by your installer.
This is a supplementary feature that has not been investigated by UL/ULC.
Must be configured by installer.
To Activate a Command Output
1. Press [*][7] and if required enter your [access code].
OR
press [*] and use the scroll keys to navigate to Output Control.
2. Press the number configured to the command output
OR
use the scroll keys to navigate to the desired command output and
press [*].
or [*][4] to toggle the Chime function On
- -
31
LCD Display
Press (*) for <>
Temperature
Back Door < >
Basement -11°C
LCD Display
Door Chime
Feature ON
Door Chime
Feature OFF
LCD Display
Output Control <>
Scroll to View
Output
Activated