Managing Users; Access Code Types - Johnson Controls Tyco PowerSeries Pro User Manual

Chapter
7

7.0 Managing Users

The maximum number of user access codes are as follows:
72 for HS3032
l
1000 for HS3128
l
Each user access code can be:
Uniquely labeled.
l
Assigned a proximity tag. In order to operate, proximity tags must be enrolled in the system.
l
Assigned to only operate specific partitions. For more information on partitions see: "Managing
l
Partitions".
Configured with additional attributes. For more information see: "Configuring additional User
l
Options".
NOTE: Your installer configures all access codes to be either 4, 6, or 8 digits.

7.1 Access Code Types

The alarm system provides the following user access code types:
Code Add User
Master All
User
No
Supervisor All but Master All but Master Yes
Duress
No
One-time user No
Installer and Master codes are system codes that can be changed but not deleted. The other codes are
user-defined and can be added or deleted as necessary. By default, access codes have the same par-
tition and attribute programming as the code used to program them.
NOTE: When using 8-digit access codes, the minimum number of variations are:
138888 for HS3032
l
100000 for HS3128
l
There are no disallowed codes.
Master
By default, the master code can access all partitions and can perform any keypad function.
Code
This code can be used to program all access codes, including the supervisor and duress
codes. The master code number is [01].
User This type of access code is used to arm and disarm assigned partitions and can access the
Codes
User Functions menu.
Supervisor
Use when you want to allow additional users to manage access codes [*5] or User Func-
Codes
tions [*6]. Supervisor codes created by the master code have the same attributes as the mas-
ter code. Supervisor codes created by another supervisor code have the same attributes,
except the supervisor attribute. After creation, attributes can be changed for all supervisor
codes. For information on how to program a supervisor code see "Configuring additional
User Options".
Duress A Duress Code is used if forced to access your keypad under threat. Duress codes function
Codes
the same as user access codes, except they transmit a Duress Report to your monitoring sta-
tion when used to perform any function on the system.
Duress codes cannot be used to change Access Codes [*5], User Functions [*6] or Installer
[*8] programming. For information on how to program a Duress Code, see "Configuring addi-
tional User Options".
One Time Used to grant someone one-time access to your home, i.e., a cleaning person or contractor.
User Code
The ability to disarm the system is reset at midnight or when the one-time user code is
keyed in by the master code user. For information on how to program a One Time User
Code, see "Configuring Additional User Options".
Delete User Arm Disarm Access Codes
All Yes Yes
No Yes Yes
Yes
No Yes Yes
No Yes 1/day
- -
20
User Functions
Yes Yes
No No
Yes Yes
No No
No No
Installer
No
No
No
No
No