Intrusion (Burglary) Alarm - Continuous Siren; Alarm Cancel Window; Viewing Alarms In Memory; Alarm Messages - Johnson Controls Tyco PowerSeries Pro User Manual

Chapter
5

5.5 Intrusion (Burglary) Alarm - Continuous Siren

!
If you are unsure of the source of the alarm approach with caution!
If the Intrusion alarm was accidental
1. Enter your Access Code to silence the alarm. If the code is entered within 30s (or the programmed
value of the alarm transmission delay) the transmission of the alarm to the monitoring station will be
cancelled.
2. Call your central station to avoid a dispatch.

5.6 Alarm Cancel Window

The control panel provides a period of time in which the user can cancel the alarm transmission
(minimum duration is 5 minutes). If the programmed alarm transmission delay has expired, canceling an
alarm sends a message to the monitoring station. Upon a successful transmission of the cancellation
message, the keypad beeps 6 times. Must be enabled and configured by the installer.
NOTE: For CP-01 systems, alarm transmission delay must not exceed 45 seconds.

5.7 Viewing Alarms in Memory

When an alarm occurs the keypad indicator illuminates. Viewing the Alarm Memory provides more inform-
ation on the sensor(s) that were activated.
To View Alarms in Memory
Press [*][3] or use the scroll keys to navigate to Alarm Memory and press [*].

5.7.1 Alarm Messages

LCD What it means
Burglary Verified Multiple burglary sensors were activated. Central station has been notified.
Burglary Not Verified A single burglary sensor was activated. Central station has been notified.
Hold-up Verified Multiple hold-up sensors were activated. Central station has been notified.
Hold-up Not Verified A single hold-up sensor was activated.
Fire Alarm Fire alarm has been triggered. Central station has been notified.
CO Alarm CO alarm has been triggered. Central station has been notified.
- -
18