4 Mounting procedure
Building Technologies
Fire Safety
The following mounting processes are described in the following chapters:
●
Mounting of rear panel
●
Fitting all components
●
Assembly of the stations
Prerequisites
●
All parts have been checked to make sure they are complete and intact.
●
Mains connection is current-free
Mounting steps
The mounting procedure described is basically an ideal procedure but does not
have to be adhered to exactly.
WARNING
Electrical voltage
Mortal danger due to electric shock
●
Before working on the station check that the cable is disconnected from the
mains supply.
●
Check to make sure that the mains is secured against inadvertently being
switched on.
●
The components must be installed by an expert.
NOTICE
Damage to hardware
●
Undertake all mechanical work before installing the station and fitting the
components.
●
Do not connect up the batteries after installation but wait until commissioning.
Mounting procedure
4
35 | 222
A6V10210390_j_en_--
2015-12-15