Siemens FS720 Mounting & Installation page 209

Building Technologies
Fire Safety
Setting for the second and/or any subsequent EVAC-NL indicator
Switch S20
1 2 3 4
S0 S1 S2 Master Syn (Empty)
OFF
ON OFF
ON OFF
ON ON OFF
ON OFF
X X X OFF
Blank fields = Switch in 'OFF' position
X = Switch position according to addresses 1 to 5
2 EVAC-NL indicators must not be operated on the same address (per station).
1
On the second or any subsequent indicator, the address must always be set 1
higher (slave). If used in the EVAC-NL mimic display driver, the S20/5 (Syn) switch
must also be ON.
Each address can be assigned only once per station.
The factory setting is always made for the application in question.
Installing, exchanging and connecting modules
Remote EVAC-NL and EVAC-NL mimic display driver
Meaning
5 6
OFF Device address 1
OFF Device address 2
OFF Device address 3
OFF Device address 4
OFF Device address 5
ON
Mimic display outputs are actuated
and polled (LED, keys and key switch)
6
1
209 | 222
A6V10210390_j_en_--
2015-12-15