Siemens FS720 Mounting & Installation page 63

Building Technologies
Fire Safety
X7 Connector for supply input Vsys 1
X400 Connector for periphery bus
Mounting steps
1. Mount the fire terminal board (2) with the six fixing screws (1) to the screw
bushings (3) that are embedded in the rear panel.
2. Wire up the fire terminal board according to the following pin assignment.
3. Re-install any modules that you may have had to remove.
Installing, exchanging and connecting modules
6
Fire terminal board
63 | 222
A6V10210390_j_en_--
2015-12-15