Siemens FS720 Mounting & Installation page 137

6.15.5.2 MoNet bus connection
Building Technologies
Fire Safety
Preparing the FN2012 for the MoNet bus connection
Figure 75: Breaking out the MoNet bus cover plate
Use a screwdriver to carefully remove the cover plate from the MoNet
κ
connector, as shown in the figure.
 By moving the screwdriver as a lever in the direction of the arrow, you will
release the cover plate at the four intended breakout points.
Connection for MoNet bus flat cable
Figure 76: Connecting the MoNet bus flat cable
Connect the 1.35 m-long flat cable for the MoNet bus to the FN2012, as shown.
κ
Installing, exchanging and connecting modules
Installing an Ethernet switch (modular) FN2012
6
137 | 222
A6V10210390_j_en_--
2015-12-15