Safety When Hoisting - stertil-KONI ST 1082-FS Installation, Operation And Maintanance Instructions

4
4.3

Safety when hoisting

In principle, the individual and per-axle control over the column lifts is intended to
enable the vehicle to be raised horizontally, or alternatively to be lowered onto axle
supports.
Safety guidelines:
• When operating an individual column lift, the maximum permissible elevation
difference is 2 inches.
• When operating two column lifts (per-axle control), the maximum permissible
elevation difference between the front and rear axles is 6 inches.
• With a tandem axle at the rear of the vehicle, the maximum permissible elevation
difference between both rear axles is 2 inches.
18,000 (22,000) lbs
18,000 (22,000) lbs
ST 1082 (ST 1100) values
Figure 4.3 Centre of gravity and weight distribution
Operating instructions (Version F)
Installation
Centre of gravity of the
vehicle 72,000 (88,000) lbs
18,000 (22,000) lbs
18,000 (22,000) lbs
29 ST 1082 & ST 1100