Scope Of This Manual; Symbols In The Text - stertil-KONI ST 1082-FS Installation, Operation And Maintanance Instructions

1
Persons who are not familiar with the operation and installation of type ST 1082 &
ST 1100 mobile column lifts are advised to read the following chapters thoroughly
and to follow the instructions given exactly.
Persons who are familiar with the operation and installation of type ST 1082 & ST
1100 mobile column lifts can use this manual as a reference. The table of contents
and the index can be used to search for the information required.
1.4

Scope of this manual

This manual contains important information about the operation, installation and
servicing of type ST 1082 & ST 1100 mobile column lifts.
For information about spare parts for these column lifts, please refer to the attached
ST 1082 & ST 1100 List of Parts and Appendices.
1.5

Symbols in the text

The following notation styles are used in this manual. Each style has its own
significance.
Text printed in bold is intended to emphasise something.
Note
n
Indicates an important aspect of the text. Read the text carefully.
Caution
c
Indicates procedures that must be followed, otherwise the machine or materials may
be damaged. Follow the procedure exactly.
Warning
w
Indicates a procedure or action which, if performed incorrectly, can lead to personal
injury or may cause damage, or otherwise indicates a prohibited action. Ignoring the
warning can lead to accidents, personal injury or serious damage to the machine.
Notations between <> such as e.g. <DOWN> indicate the control buttons of the
column lift.
Operating instructions (Version F)
General
11 ST 1082 & ST 1100