External Remote Control - One Touch - Dog trace d-control 600 User Manual

Booster button setting:
Press continuously button for the choice of the dog 1 or 2 (button for receiver 1 or
for receiver 2 according to required pairing), until you see on LCD symbol 1/2
flashing. With the buttons choose requiered intensity of the stimulation
/
impulse on the booster button. Confirm the choice by short button press .
Control buttons
These buttons are used for prompt setting of the stimulation intensity in the receiving
collar. It is possible to set up 30 levels, which are indicated by numbers 1–30 on the LCD.
When the stimulation level setting is changed, the LCD will lit up for 3 seconds.
Control buttons
These buttons are used for selection of the dog 1 or 2. You can set different stimulation
level for each dog, which will stay saved when switched over to another dog.

External remote control - one touch

The external remote is very helpful addition of the transmitters d-control 610, 1010,
1610. d-control models equipped with this accessory are suitable especially for
professional dog sport and hunting training. They may be also used while jogging,
cycling, horse riding etc.
These models have same functions as basic models
d-control (audible beep tone, stimulation impuls and
booster). Standard models d-control are not edited
for the connection of the external remote.
Without any need of manipulation with transmitter
and by pressing one button only you activate the
pre-set stimulation impuls. Other functions can be
activated by pressing transmitter buttons.
17