Covidien Nellcor PM100N Home Use Manual page 16

Bedside spo2 patient monitoring system
Table of Contents

Advertisement

WARNING – Never use a battery other than the one
provided with the monitoring system. Batteries that
are not compatible may cause electric shock.
WARNING – Do not submerge or apply liquid to the
monitoring system or prescribed sensor. This may lead
to electric shock.
WARNING – Do not crimp the sensor cable or power
cable, as this may damage the cable. Damaged cables
may affect measurement accuracy and increase the
risk of electric shock.
WARNING – Never clean the monitoring system
without unplugging it. Leaving the device plugged
into the power outlet may lead to electric shock.
WARNING – Do not touch the LCD screen if broken.
The screen contains toxic chemicals that may be
dangerous to your health.
Support 1.800.635.5267
WARNING – Avoid leaving cables loose, as this may
lead to tripping or strangulation.
WARNING – Do not place the monitoring system in
any location where it might fall on the patient. This
may cause patient injury or damage to the monitoring
system.
WARNING – Do not lift or carry the monitoring system
by the sensor or sensor cable. This may cause the
sensor to disconnect and the monitoring system to
fall, which may cause injury to the patient or caregiver
or damage to the monitoring system.
WARNING – Keep the monitoring system out of
reach of children and pets to avoid accidents such as
choking or injury from a falling monitor.
16
PM100N Home Use Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents