Covidien Nellcor PM100N Home Use Manual page 17

Bedside spo2 patient monitoring system
Table of Contents

Advertisement

WARNING – Do not use a monitoring system or sensor
that appears damaged. Use of a damaged monitoring
system or sensor may result in incorrect readings.
WARNING – Never use accessories other than those
prescribed by your clinician. Use of incompatible
accessories may lead to incorrect measurements
or increased electromagnetic interference to the
monitoring system or from the monitoring system to
other electronic devices.
WARNING – Avoid incorrect application or use of
the sensor. Incorrect use may lead to tissue damage
or inaccurate measurements. Examples of incorrect
application include, but are not limited to:
• Applying the sensor too tightly (too much pressure)
• Wrapping the sensor with another material
Support 1.800.635.5267
• Applying the sensor with the assistance of tape or
other adhesives
• Leaving the sensor in one place for longer than
recommended
Consult your clinician if you are unsure of correct
sensor use.
WARNING – Do not reuse any sensor intended
for single use only. This may lead to inaccurate
measurements. Consult your clinician if you are unsure
if the prescribed sensor is single use only.
WARNING – Certain physical conditions may affect
calculation of SpO
2
include, but are not limited to: Dysfunctional
hemoglobin, arterial dyes, low perfusion, and darkly
pigmented skin. If you are unsure if any of these
conditions apply to you, contact your clinician.
17
and pulse rate. These conditions
PM100N Home Use Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents