Maintenance; Safety Notes; Changing Of The Laser Source Filter Mat - Trotec ProMarker OEM Operating Manual

10

Maintenance

10.1

Safety notes

Caution
Before any maintenance work takes place, ensure that the power supply has been switched off
and the system is de-energised.
Notice
All maintenance work must be carried out according to the safety regulations.
In order to ensure the maximum availability and lifetime of the system, we recommend you regularly check
the filter system and ventilation and keep the surrounding area clean. Before switching on the system, make
a visual inspection of the lenses.
10.2

Changing of the laser source filter mat

This laser system is fitted with a ventilation system. A filter pad is used to protect the electronic components
from dust and dirt in the ambient air. This filter pad should be checked and replaced at regular intervals in
order to ensure optimum cooling.
The filter pad is located behind the ventilation slots on the front of the laser rack.
Laser rack filter pad:
ENGLISH (Translation)
Maintenance
51