Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BF06
Summary of Contents for Trotec BF06
- Page 1 BF06 OPERATING MANUAL LUXMETER...
-
Page 2: Table Of Contents
• Do not remove any safety signs, stickers or labels from the operating manual must be observed. device. Keep all safety signs, stickers and labels in legible condition. • Do not open the device. • Observe the storage and operating conditions as given in the Technical data chapter. luxmeter BF06... -
Page 3: Information About The Device
By use of the luxmeter the luminous intensity can be determined To use the device for its intended use, only use accessories and spare parts which have been approved by Trotec. in lux or fc (foot candle). Further available for the assessment of the measurements is a Improper use MAX function (maximum value). -
Page 4: Transport And Storage
2.5 x per second Operating 0 °C to 40 °C at max. 80 % RH temperature (non-condensing) Operating altitude max. 2000 m Storage temperature -10 °C to 60 °C Power supply 1 x 9 V battery (battery life approx. 5000 to 8000 measurements) Device switch-off after approx. 17 minutes of non-use luxmeter BF06... -
Page 5: Operation
ð If the measured value exceeds the measuring range (> 40 klx or 4000 fc), the display reads OL or VO. 3. If a factor (8, 9) is displayed, the displayed measured value (10) must be multiplied by the factor in order to obtain the correct value. luxmeter BF06... -
Page 6: Errors And Faults
Do not use any sprays, solvents, alcohol-based cleaning agents or abrasive cleaners, but only clean water to moisten the cloth. Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. luxmeter BF06... - Page 7 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...