Machine Modification; Operating Modes; Applicable Safety Regulations - Trotec ProMarker OEM Operating Manual

Safety
3.1.4

Machine modification

It is strictly prohibited to alter, refit or modify the machine in any way without the express consent of the
manufacturer.
Likewise, it is strictly prohibited to remove, bridge or bypass any safety devices. Operating conditions and
connection and setup values stated in the data sheet must be complied with at all times.
Operation of the system is permitted only with original parts and accessories by the manufacturer. Use of
third-party parts affects machine safety.
3.1.5

Operating modes

Normal operation
For normal operation the following conditions must be met:
Intended use of the machine (see chapter "Intended use").
•
Operation of the machine only by trained personnel.
•
Full functional and mounted safety devices.
•
Machine must be in technically flawless condition.
•
Processing of permissible materials according to the material list.
•
Maintenance and service are not included.
•
Notice
During normal operation it is not necessary to wear safety glasses.
Service operation
Service activities may be carried out only by authorized, trained service technicians. If side panels as well as
covers get removed and safety devices get bypassed, it can lead to direct and indirect scattered radiation.
The service operation is therefore declared as laser class 4 (US: class IV) and proper precautions need to be
taken (see "Laser classification").
3.1.6

Applicable safety regulations

The following directives and guidelines must be observed to avoid hazards when operating Trotec laser
systems:
Guidelines/Regulations
2006/42/EC
2014/30/EU
18
EC Machinery Directive
EMC Guideline
ENGLISH (Translation)