In Case Of Emergency - Trotec ProMarker OEM Operating Manual

Safety
3.7

In case of emergency

In case of malfunction
In case of unusual operating states, open the acrylic top lid to stop working process or respectively press
•
the Emergency stop button, if available and switch off the laser device.
When appropriate disconnect the machine from the mains.
•
Inform laser safety officer and supervisor.
•
Follow the Operating manual.
•
Have repair work performed by Trotec Laser GmbH service technicians only.
•
In case of fire: Use only CO
•
endangering yourself.
Notice
After a deletion, Trotec Technical Support must be involved before the system is put back into
operation.
In case of accident, First Aid
If due to laser irradiation eye injury has occurred (upon exceedance of the maximum allowable irradiation
•
rate), the accident victim must immediately be presented to an ophthalmologist.
Assumption of eye injury is justified whenever laser irradiation has occurred and the maximum allowable
•
irradiation rate may have been exceeded.
First aider must pay attention to self-protection.
•
Power off the device.
•
Remove injured person from the danger zone and provide First Aid.
•
Call emergency doctor!
•
26
fire extinguisher to quench the fire, insofar as this is possible without
2
ENGLISH (Translation)