The scope of delivery may vary from product images. This ® document was created with all due care. TROTEC accepts no liability whatsoever for possible mistakes or omissions. The only party responsible for determining measured results to be...
Operating elements Technical data Model: BM31 Weight: 190 g Dimensions (H x W x D): 190 mm x 55 mm x 32 mm Measuring range: 0 to 100 digits Measuring principle: Dielectric Measuring range resolution: 1 digit Penetration depth: 5 to 40 mm Operating temperature: 0 to 40 °C Storage temperature:...
Do not use abrasive cleaners or solvents to clean the To use the device for its intended use, only use accessories and device. ® spare parts which have been approved by TROTEC Improper use Transport and storage Do not use the device in potentially explosive atmospheres, for Transport measurements in liquids or at live parts.
• During the measurement always hold the ball head in a Measuring principle vertical position to the measured material, press it to the The measurement is effected according to the dielectric surface and do not tilt it. measuring principle. In the course of the measurement the •...
Calibrating the measuring device Operation The device is calibrated anew whenever it is switched on. Inserting the battery 1. Hold the measuring device preferably somewhere near the Caution! bottom and in one hand (corrugated rubber coating). Make certain that the surface of the device is dry and the 2.
For repairs or device testing, contact the developed, constructed and produced in compliance with the manufacturer. named EC directives. marking is found on the rear of the device. Manufacturer: Trotec GmbH & Co. KG Grebbener Straße 7 D-52525 Heinsberg Phone: +49 2452 962-400 Fax:...
Page 8
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info @ trotec.com www.trotec.com...