Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec T610
Summary of Contents for Trotec T610
- Page 1 T610 OPERATING MANUAL MATERIAL MOISTURE MEASURING DEVICE...
-
Page 2: Table Of Contents
Further, ® TROTEC accepts no liability whatsoever for possible mistakes or damage which have been caused by utilising the determined ® measured results. © TROTEC Operating manual – Material moisture measuring device T610... -
Page 3: Information About The Device
Cross control Information about the device Description of the device The material moisture measuring device T610 measures the moisture level of building material up to a depth of 30 cm by means of microwaves. The measurement method belongs to the dielectric measurement methods. -
Page 4: Technical Data
4 x Alkaline LR6 AA, 1.5 V batteries Intended use comparable NiMH rechargeable batteries (>2500 mAh) Only use the material moisture measuring device T610 for the Current consumption, active approx. 110 mA moisture measurement of building materials. Current consumption, passive approx. -
Page 5: Transport And Storage
• When storing the device for a long time, remove the batteries. Accessories Optionally, the following accessories are available for transport and storage: ® • TROTEC Holster 3 ® For further information please contact your TROTEC customer service. Operating manual – Material moisture measuring device T610... - Page 6 – The device emits a short beep. ing the entire measuring process. – The following message appears on the display: LoC off. – The measured value will be displayed. – Key lock is no longer activated. Operating manual – Material moisture measuring device T610...
- Page 7 3. Select the desired value by use of the Up (7) or Down (9) key. 4. Press the OK button (10) for approx. 2 seconds. – The set value will be adopted. – The device switches to measuring mode. Operating manual – Material moisture measuring device T610...
- Page 8 1. Briefly press the OK button (10). – The displayed measured value will be saved in the soft- ware. Further information can be gathered from the help text of the MultiMeasure Studio software. Operating manual – Material moisture measuring device T610...
-
Page 9: Measuring Principle
In a way, there is friction within the material or in other words dielectric loss. These losses can be measured by means of specific microwave arrangements. Operating manual – Material moisture measuring device T610... -
Page 10: Pc Software
– 512 MB RAM, minimum localizing metal objects and detecting reinforcements. – 1 GB hard disk space, minimum ® – Optional: TROTEC USB dongle (Professional) for using the professional version of the PC software Operating manual – Material moisture measuring device T610... -
Page 11: Errors And Faults
Errors and faults 1. Download the current PC software from the Internet. To do so, visit the website www.trotec.de. First click on Service, The accurate functionality of the device was tested during pro- followed by Downloads and then Software. Select the duction a number of times. -
Page 12: Disposal
Directive ity. 2002/96/EC of the European Parliament and Council of Herewith, we declare that the T610 material moisture measuring 27th January 2003 concerning old electrical and electronic device was developed, constructed and produced in compliance equipment. After the end of its use, please dispose of this device with the named EC directives. - Page 13 TROTEC GmbH & Co. KG Grebbener Str. 7 52525 Heinsberg Deutschland +49 2452 962-0 +49 2452 962-200 info@trotec.com www.trotec.com...