Keep all safety signs, stickers and labels in legible Information marked with this symbol indicates that the condition. operating manual must be observed. • Do not open the device. • Observe the storage and operating conditions as given in the Technical data chapter. moisture measuring device BM18...
To use the device for its intended use, only use accessories and level of wood and building material can be determined. spare parts which have been approved by Trotec. Additionally, the ambient temperature can be measured in °C or °F.
Building moisture measured value until 1.4 %: ± 0.1 % Building moisture measured value from 1.4 %: ± 0.2 % Temperature: not specified Ambient temperature 0 to 40 °C at < 80 % RH Power supply 1 x 9 V battery Automatic switch-off after approx. 30 seconds moisture measuring device BM18...
Page 5
5. Upon conclusion of the measurement put the protective • Put the protective cap back on the device. cap back on the device. moisture measuring device BM18...
• If possible, do not measure wood with a temperature below -5 °C. Too low wood temperatures distort the result of the measurement. • Avoid static charge of the material to be measured due to friction. Static charge distorts the measurement result. moisture measuring device BM18...
Please dispose of batteries and cleaners, but only clean water to moisten the cloth. accumulators according to the relevant legal requirements. Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. moisture measuring device BM18...