HP EliteOne G5 Maintenance & Service Manual page 92

Set a location for storing the test results. You can also set the user name and password settings used for
●
uploads.
Display status information about the diagnostics run previously.
●
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take effect when the computer restarts.
84 Chapter 6 Using HP PC Hardware Diagnostics
f10 to enter Computer Setup.