Power Supply - HP EliteOne G5 Maintenance & Service Manual

Power supply

The power supply is located in the upper left side of the computer.
To remove the power supply:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the VESA mounting bracket/fan assembly (see
on page
6. Remove the three Torx screws (1) that secure the power supply to the computer.
7. Disconnect the power supply cable from the system board connector (2).
8. Lift the power connector from its housing in the I/O bracket (3).
9. Remove the power cable from the clips built into the computer (4).
50 Chapter 4 Removal and replacement procedures
Removing the rear port cover on page
Stands on page
Access panel on page
48).
Preparation for disassembly on page
24).
25).
VESA mounting bracket/fan assembly
23).
23).