Rfid Board (Select Products Only) - HP EliteOne G5 Maintenance & Service Manual

RFID board (select products only)

An RFID board may be included with healthcare models. It is located near the bottom of the chassis.
To remove the RFID board:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Disconnect the cable ZIF connector on the board (1), remove the two Phillips screws (2) that secure the
board to the computer, and then remove the board from the computer (3).
Preparation for disassembly on page
Removing the rear port cover on page
Stands on page 24).
Access panel on page
23).
25).
RFID board (select products only)
23).
39