Approvals; Symbols - Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual

1. How to Read these Operating Instructions
Available Literature for FC 300
- ®
The VLT AutomationDrive FC 300 Operating Instructions provide the neccessary information for getting the drive up and running.
1
- The VLT ® AutomationDrive FC 300 Design Guide entails all technical information about the drive design and applications including encoder,
resolver and relay options.
- ®
The VLT AutomationDrive FC 300 Profibus Operating Instructions provide the information required for controlling, monitoring and programming
the drive via aProfibus fieldbus.
- The VLT ® AutomationDrive FC 300 DeviceNet Operating Instructions provide the information required for controlling, monitoring and program-
ming the drive via aDeviceNet fieldbus.
-
The VLT ® AutomationDrive FC 300MCT 10 Operating Instructions provide information for installation and use of the software on a PC.
- The VLT ® AutomationDrive FC 300 IP21 / Type 1 Instruction provides information for installing the IP21 / Type 1 option.
-
The VLT ® AutomationDrive FC 300 24 V DC Backup Instruction provides information for installing the 24 V DC Backup option.
Danfoss Drives technical literature is also available online at www.danfoss.com/drives.

1.1.2. Approvals

1.1.3. Symbols

Symbols used in these Operating Instructions.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
∗
4
Indicates default setting
MG.33.AB.02 - VLT is a registered Danfoss trademark
®
VLT AutomationDrive FC 300 Operating
Instructions