Reorder Information, Technical Data, Warranty Terms - Dentsply Sirona SmartLite Pro Instructions For Use Manual

Modular led curing light
Hide thumbs Also See for SmartLite Pro:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

6. REORDER INFORMATION, TECHNICAL DATA, WARRANTY TERMS

6.1 Accessories
Accessory
SmartLite Pro Battery Refill 1x
SmartLite Pro Sleeve Refill 100x
SmartLite Pro Shield Refill 5x
SmartLite Pro Power Connector Refill 1x
SmartLite Pro Transillumination Tip Refill 1x
SmartLite Pro PolyCure Tip Refill 1x
SmartLite Pro Cure Tip refill 1x
SmartLite Pro O-rings refill 3x
6.2 Serial number
The handpiece, battery packs, charging base and tips have different serial numbers.
The serial number (
of the product. XXXXX = 00001 through 99999 as marked on the component
Serial number format SmartLite Pro handpiece and complete kit
Serial number format SmartLite Pro charging base:
Serial number format SmartLite Pro Transillumination tip
Serial number format SmartLite Pro Cure tip:
Serial number format SmartLite Pro PolyCure tip:
6.3 Technical Specifications
AC supply connection:
Charging Base
Power input:
Operation:
Storage:
Transport:
Battery performance:
Battery over current/
temperature protection:
Light emitting diode:
Average light intensity:
Output peak
wavelength range:
Effective curing diameter of
curing tips:
Transillumination Tip
18
) should be quoted in all correspondence which requires identification
110 V - 240 V / ~ 50 - 60 Hz
5V, 1A
Ambient temperature: Between 10 °C and +30 °C (50 °F and 86 °F)
Relative humidity: Between 20% and 90%
Ambient temperature: Between 5 °C and +35 °C (41 °F and 95 °F)
Ambient temperature: Between -10 °C and +50 °C (14 °F and 122 °F)
• Battery is pre-charged however, charging is recommended prior to first
use.
• Time for battery recharge: Approximately 2 hours.
• 3.2V, 600 mAh
Resettable fuse
Cure and PolyCure tip: Four 3 W LEDs
Cure Tip: Approximate irradiance 1200 mW/cm
PolyCure Tip: Approximate irradiance 1200 mW/cm
Cure Tip: Between 450 nm and 480 nm
(intensity maximum peak around 465 nm)
PolyCure Tip: Between 405 nm – 480 nm
(intensity maximum peaks around 420 and 465 nm)
10 mm
Approximate power: 8-10 mW and 20-24 mW
Light temperature: 5000-6000K
Reorder no.
644401
644402
644403
644404
644405
644406
644407
644408
HXXXXX
CXXXXX
TXXXXX
BXXXXX
PXXXXX
2
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents