Technical Information; Technical Description - Dentsply Sirona CEREC AF Operating Instructions Manual

Dentsply Sirona
Operating Instructions (valid for Canada)
66 37 487 D3652
D3652.201.01.21.02 03.2021
5

Technical information

5.1

Technical description

CAD system for high-precision intraoral optical impressions
● High-resolution, heated oral camera (3D camera) with removable
reflective sleeve (reflective sleeve sterilizable with hot air)
● Integrated image processing
● High processing power due to state-of-the-art processor
● Camera storage cradle can be disinfected by wiping.
High-resolution 3D intraoral camera with control and image
processing electronics
● Measuring technique:
● Light source:
● Image acquisition:
● Image data transfer:
PC hardware requirements
Special PC with the following equipment:
● Processor:
● RAM:
● Hard disks:
● Network adapters:
● WLAN card:
● Sound card:
● Graphics card:
PC software requirements
● Operating system:
● Installation:
5 Technical information
5.1 Technical description
Triangulation
White LED, unpolarized, visible
spectral range
Image control inside the camera
Gigabit Ethernet Standard
®
Intel
32 GB RAM
1x PCIe SSD, 1x SATA HDD
2x Ethernet 10/100/1000 Mbps
Windows 10, 64 bit
The operating system is installed at
the factory.
During initial start of the PC, the
language selection is made.
19