The Sure Cross ® Performance Wireless Network; Sure Cross ® Performance Gateways And Nodes; Gatewaypro - Banner Sure Cross DX80 Series Instruction Manual

®
Sure Cross Performance DX80 Wireless I/O Networks
1 The Sure Cross
FlexPower Node
with Integrated
Battery
Gateway
Node
®
1.1 Sure Cross
Every wireless network must have one Gateway, which schedules communication traffic and controls the I/O configuration
for the network, and one or more Nodes.
A Gateway is the master device within each radio network. Similar to how a gateway device on a wired network acts as a
"portal" between networks, the Sure Cross Gateway acts as the portal between the wireless network and the host
controller. When the Gateway, using its Modbus RTU RS-485 connection, is a Modbus slave to a Modbus RTU host
controller, the wireless network may contain up to 47 Nodes in a single wireless network. The Gateway holds the Modbus
registers of all wireless devices within the network.
A Node is a wireless network end-point device used to provide sensing capability in a remote area or factory. The Node
collects data from sensors and communicates the data back to the Gateway. Nodes are available in a wide variety of power
or input/output options.
FlexPower Node
with Integrated
Battery

1.2 GatewayPro

A GatewayPro combines the wireless capability of the standard Gateway with the protocol converter of a DX83 Ethernet
Bridge, resulting in a device that is the master of the wireless network and a slave to an Industrial Ethernet network.
The GatewayPro is treated the same as a standard Gateway, with the GatewayPro providing Modbus/TCP or EtherNet/IP
slave access to all the information on the wireless network instead of the Modbus 485 slave interface the standard Gateway
provides. There are two basic models of the GatewayPro:
• DX80P*T6*. The T6 model acts as a protocol converter only, offering the Modbus/TCP or EtherNet/IP
communication protocols.
4
®
Performance Wireless Network
Node
Performance Gateways and Nodes
Gateway
Node
www.bannerengineering.com - Tel: + 1 888 373 6767
®
The Sure Cross Performance wireless I/O network provides
reliable monitoring without wiring or conduit installation. The
SureCross wireless network operates independently or in
conjunction with a host system, PLC, and/or PC software.
Each wireless network system consists of one Gateway and
one or more Nodes. Devices ship with factory-defined discrete,
analog, or a mix of discrete and analog inputs and outputs.
®
The Sure Cross Performance network is a deterministic
system—the network identifies when the radio signal is lost
and drives relevant outputs to user-defined conditions. After
the radio signal is reacquired, the network returns to normal
operation.
Node