Banner SureCross Performance GatewayPro Series Manual

SureCross Performance GatewayPro
Performance GatewayPro for protocol conversion or web-based configuration
For additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering's
website, www.bannerengineering.com/surecross.
Models Power
DX80P9T6S-P
+10 to 30V dc
DX80P9A6S-P
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
Important: Never Operate 1 Watt Radios Without Antennas.
To avoid damaging the radio circuitry, never power up SureCross Performance or SureCross MultiHop (1
Watt) radios without an antenna.
The SureCross® Performance Wireless Network
The SureCross® Performance wireless I/O network provides reliable monitoring without the burden of wiring or conduit installation. The
SureCross wireless network can operate independently or in conjunction with a host system, PLC, and/or PC software.
Each wireless network system consists of one Gateway and one or more Nodes. Devices ship with factory defined inputs and outputs
that may be all discrete, all analog, or a mix of discrete and analog I/O.
P/N 157639 Rev. B
The SureCross® wireless system is a radio frequency network with integrated I/O
that can operate in most environments and eliminate the need for wiring runs. Wire-
less networks are formed around a Gateway, which acts as the wireless network mas-
ter device, and one or more Nodes.
• Selectable transmit power levels of 250 mW or 1 Watt and license-free operation
up to 4 watt EIRP, with a high-gain antenna, in the U.S. and Canada for 900 MHz
• 10 to 30V dc power input
• Modbus serial interface and Ethernet interface
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Mul-
tiple Access (TDMA) control architecture ensure reliable data delivery within the
unlicensed Industrial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and
Node, including fully acknowledged data transmission
• Site Survey analyzes the network's signal strength and reliability and displays the
results on the Gateway's LCD
• Lost RF links are detected and relevant outputs set to user-defined conditions
Frequency Feature
Modbus/TCP or EtherNet/IP communication protocol
900 MHz ISM Band
Modbus/TCP protocol (Configuration capability using the Web Configu-
rator)
10/31/2012
0 157639 9