Run Menu - Banner Sure Cross DX80 Series Instruction Manual

5.1.1 RUN Menu

The RUN menu displays the network ID (NID), device name (Gateway or Node), and the I/O values of the device.
Gateway
* RUN
*
AUTO
adjust the rotary
DISPLAY
switches to survey
LOOP
the selected Node
Single-click
Single-click Single-click
Button 1 Button 1
NID XX NID XX
(DEV) (DEV)
GATEWY GATEWY
I/O XX I/O XX
ON/OFF ON/OFF
Node
RUN
AUTO
DISPLAY
LOOP
Button 1
NID XX
(DEV)
NOD XX
I/O XX
0.00
ON/OFF
www.bannerengineering.com - Tel: + 1 888 373 6767
®
Sure Cross Performance DX80 Wireless I/O Networks
On the Gateway, the I/O displayed may be the I/O of the
Gateway or of a selected Node. To view the I/O of a specific
Node, set the position of the rotary dials to the Node's
address. For example, to view the I/O of Node 12, set the
Gateway's left rotary dial to 1 and the right rotary dial to 2.
When using extended address mode, the network ID (NID) is
not used. The Network ID is typically used only in rotary dial
address mode.
31