Husqvarna Automower 310 Operator's Manual page 24

2
500 m / 56 ≈ 9 h.
2
600 yd / 0.01 ≈ 9 h.
Days / h / day
week
7 9
3.9.2.2 To set the timer
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview .
3. Use the arrow buttons and the OK button to
select the day.
4. Use the left arrow button to select the time
period.
5. Push the OK button.
6. Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods
each day.
7. If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
3.9.2.3 To copy the timer setting
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Copy
to .
3. Use the arrow buttons and the OK button to
copy the timer setting. You can copy the
timer settings day to day or for the full week.
24 - Installation
Timer settings
07:00 - 16:00 / 07:00
am - 4 pm
Timer >
Timer >
3.9.2.4 To reset the timer setting
You can remove all timer settings and use the
factory setting. The factory timer setting lets the
product to operate all hours of each day of the
Timer and Standby on page 35 .
week. Refer to
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Reset
timer .
a) Push the arrow buttons to select
Current day to only set the current day
to factory settings.
b) Push the arrow buttons to select
week to reset all timer settings to
factory settings.
3. Push the OK button.
3.9.3 Security level
There are 3 security levels for the product.
Function Low
Alarm
PIN-code
Time lock X
• Alarm - An alarm goes off if the PIN-code is
not entered within 10 seconds after the
STOP button is pushed. The alarm also
goes off when the product is lifted. The
alarm stops when the PIN-code is entered.
• PIN-code - The correct PIN-code must be
entered to get access to the Menu structure
of the product. If the incorrect PIN-code is
entered 5 times, the product is locked for a
time. The lock is extended for each new
incorrect try.
• Time lock - The product locks if the PIN-
code has not been entered in 30 days. Enter
the PIN-code to get access to the product.
3.9.3.1 To set the security level
Select 1 of 3 security levels for your product.
Timer >
All
Medium High
X
X X
X X
1220 - 001 -